فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


اطلاعات دوره: 
  • سال: 

    1400
  • دوره: 

    51
  • شماره: 

    4
  • صفحات: 

    431-441
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    147
  • دانلود: 

    24
چکیده: 

Different types of Contact, including Contact between node pairs, any-Contact of nodes, and Contacts of the entire network, are used to characterize social relations in mobile social networks. Different modes of routing, from the point of view of message delivery semantics, encompass unicasting, multicasting, any-casting, and broadcasting. Studies have shown that using probability distribution functions of Contact data, which is mainly assumed to be homogeneous for nodes, improves the performance of these networks. However, there exists an important challenge in studies on distributions. A lot of works apply the distribution of one type of Contact to other types. Hence in routing applications, it causes to use of the distribution of one type of Contact for any mode of routing. This study provides a complete solution to model each type of homogeneous Contact data distribution and to use them in different modes of routing. We propose a routing algorithm that uses this new model. Results show that our solution improves the average latency of comparing methods Epidemic, TCCB, and DR about 3.5-times, 30%, and 45%, respectively. It achieves a delivery rate of about 5% and 6%, and average latency about 6% and 8% better than that of DR and TCCB, respectively.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 147

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 24 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

اطلاعات دوره: 
  • سال: 

    1396
  • دوره: 

    8
  • شماره: 

    4
  • صفحات: 

    412-429
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    204
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 204

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

محمدزاده اصل نازی

اطلاعات دوره: 
  • سال: 

    1381
  • دوره: 

    2
  • شماره: 

    3 (پیاپی 6)
  • صفحات: 

    73-100
تعامل: 
  • استنادات: 

    2
  • بازدید: 

    3490
  • دانلود: 

    772
چکیده: 

این تحقیق مدل رشد نئوکلاسیک را با استفاده از روش داده های تابلویی، مورد آزمون قرار داده است. روش داده های تابلویی روشی است که بر پایه آن در یک آزمون اقتصادسنجی به طور همزمان دو سری زمانی و مقطعی کنار یکدیگر قرار گرفته و نقاط مورد مشاهده افزایش می یابد و در نتیجه کارایی تخمین زده می شود. آزمون تئوری رشد نئوکلاسیک با تاکید بر عوامل برون زا و درون زا، برای 52 کشور منتخب در سری زمانی 1960 تا 2000 انجام پذیرفته است. متغیرهای مستقل مدل، بر اساس نتایج تحقیقات آزمون شده قبلی انتخاب شده و در سه مدل مجزا که در مقاطع کشورهای توسعه یافته، در حال توسعه و کل کشورها می باشند، از نظر قدرت توضیح دهندگی مورد آزمون قرار گرفته اند. این عوامل عبارتند از: تولید ناخالص ملی با یک وقفه زمانی، نرخ رشد سنی نیروی کار، سطح تحصیلات، تغییرات انباشت سرمایه و حجم تجارت اقتصاد. نتیجه آزمون ها حاکی از آن است که مدل رشد نئوکلاسیک، با ورود متغیرهای درون زا می تواند بخش قابل توجهی از رشد اقتصادی کشورها را توضیح دهد. این مساله به خصوص در مورد کشورهای توسعه یافته صنعتی از قاطعیت بیشتری برخوردار است. در عین حال با بهره گیری از روش تابلویی اثرات ثابت، می توان تفاوت های ساختاری و بنیادی کشورهای مختلف را در فرایند رشد اقتصادی مشاهده کرد و نشان داد که شرایط مختلف اقتصادی، اجتماعی و... چگونه در کشورها و مناطق متمایز رشد را تحت تاثیر قرار می دهد. .

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 3490

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 772 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 2 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1386
  • دوره: 

    34
  • شماره: 

    2 (پیاپی 47) ویژه مهندسی مکانیک
  • صفحات: 

    23-31
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    1493
  • دانلود: 

    0
چکیده: 

تروارس پس از ریل مهمترین المان روسازی راه آهن می باشد که نقش آن حفظ هندسه خط، مقاومت در برابر بارهای قایم و جانبی و انتقال آنها به لایه بالاست می باشد. اتصال تراورس به لایه بالاست به صورت تماسی بوده و نقش مهمی را در زوال خط راه آهن بازی می کند. به همین دلیل نحوه آنالیز، طرح و ساخت تراورس ها و همچنین بکارگیری آنها در روسازی خط آهن در تحقیقات مهندسی راه آهن بسیار حایز اهمیت است. در این مقاله بررسی توزیع تنش تماسی در سطح زیرین تراورس به وسیله انجام آزمایش هایی در خط آهن صورت گرفته است. در این آزمایش ها تراورسی حاوی نیروسنج های جاسازی شده در خط آهن واقع در ایستگاه بهرام نصب گردید. پس از نصب تراورس، با عبور قطارهای با بار محوری مشخص، نیروهای وارده بر تراورس قبل از زیرکوبی و بعد از زیرکوبی مورد بررسی قرار گرفت. از نتایج حاصل از این آزمایش ها می توان به تعیین الگوی توزیع واقعی تنش تماسی در سطح زیرین تراورس در حالت های مختلف (بعد از زیرکوبی و قبل و بعد از پایدارسازی) و تاثیر و اهمیت تراکم مورد نیاز بالاست در زیر تراورس اشاره کرد. نتایج بدست آمده حاکی از آن است که مقدار مناسب بالاست و تراکم کافی آن در زیر تراورس و عملکرد ماشین های نگهداری و تعمیر خط آهن بسیار حایز اهمیت است و ناهمگونی در پخش نیروها را کاهش می دهد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1493

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1395
  • دوره: 

    3
تعامل: 
  • بازدید: 

    3153
  • دانلود: 

    3271
چکیده: 

لطفا برای مشاهده چکیده به متن کامل (PDF) مراجعه فرمایید.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 3153

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 3271
اطلاعات دوره: 
  • سال: 

    2023
  • دوره: 

    10
  • شماره: 

    1
  • صفحات: 

    69-79
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    28
  • دانلود: 

    0
چکیده: 

One of the parameters that play an important role in the efficiency of polymer electrolyte membrane fuel cells (PEMFCs) is the Contact pressure between the bipolar plates and membrane electrode assembly (MEA). Increasing or decreasing the Contact pressure between the plates causes ohmic losses and decreases the efficiency of the fuel cell. In this research, the Contact pressure distribution over the MEA in the three-cell fuel cell stack with metallic bipolar plates with an active area of 100 cm2 was investigated numerically and experimentally. Abaqus finite element software has been used for finite element simulation. Due to the asymmetry of the flow field of metallic bipolar plates, a full three-dimensional model has been used for simulation. In order to experimentally investigate the Contact pressure distribution on the MEA, the pressure sensitive film of Fujifilm was used. Considering that the fuel cell stack includes three cells, pressure sensitive film is used in the middle cell and thin insulating plates are used in the first and third cells. Finally, after disassembling the fuel cell stack and separating the pressure sensitive film, the experimental test results are compared with the simulation results. The simulation results showed that the pressure changes on the active area are less than 0.3 MPa. The average Contact pressure on the active area with a press force of 3.7 tons is about 1 MPa. Also, the results of the experimental tests were in good agreement with the simulation results.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 28

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    8
  • شماره: 

    4 (ویژه نامه پرتوهای یون ساز)
  • صفحات: 

    311-318
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    459
  • دانلود: 

    102
چکیده: 

امروزه رادیوجراحی استریوتاکتیک مبتنی بر گامانایف، برای درمان ضایعات مغزی با ابعاد کوچک بسیار توسعه یافته است. جهت بررسی دزیمتری و ارزیابی سیستم طراحی درمان گامانایف نیاز به استفاده از شبیه سازی مونت کارلو با استفاده از کد اختصاصی beamnrc که دارای گزینه های non CT data و CT data است، می باشد. اما با توجه به مزایا و عدم مزایای این گزینه ها، انتخاب گزینه بهتر و صحیح تر کد هدف اصلی این مطالعه می باشد. در این مطالعه برای اندازه گیری توزیع دز از دستگاه گامانایف مدل 4C، فانتوم استاندارد کروی معادل آب و نیز فیلم های EBT3 بهره گیری شد. شبیه سازی فانتوم کروی با هر دو گزینه کد beamnrc، CT data و non CT data انجام گرفت و نتیجه توزیع دز حاصله مقایسه گردید. مقایسه نتایج توزیع دز شبیه سازی با اندازه گیری در هر سه راستا با دارا بودن شاخص گامای کوچکتر از یک نشاندهنده اعتبار شبیه سازی می باشد. همچنین مقایسه توزیع دز حاصل از شبیه سازی به هر دو روش نشان دهنده اختلاف معنی داری بین منحنی ها نمی باشد. براساس نتایج بدست آمده کد beamnrc با استفاده از هر دو گزینه CT data و non CT data می تواند دقت یکسانی جهت محاسبه توزیع دز فراهم نماید. لذا روش non CT data با توجه به سهولت استفاده برای فانتوم های با شکل منظم ارجح می باشد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 459

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 102 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    2016
  • دوره: 

    4
تعامل: 
  • بازدید: 

    176
  • دانلود: 

    0
چکیده: 

THE PARETO distribution IS A SKEWED, HEAVY-TAILED distribution THAT IS USUALLY USED TO MODEL THE distribution OF INCOMES AND OTHER FINANCIAL VARIABLES. MOREOVER, ADDING ONE OR MORE PARAMETERS TO A distribution MAKES IT RICHER AND MORE FLEXIBLE FOR MODELING data. IN THIS PAPER, WE CONSIDER THE PROBLEM OF ESTIMATION OF THE PARAMETERS OF THE EXPONENTIATED PARETO distribution. A GRAPHICAL METHOD IS DEVELOPED TO OBTAIN MAXIMUM LIKELIHOOD ESTIMATES OF THE UNKNOWN PARAMETERS. APPLYING THE BAYESIAN APPROACH, THE ESTIMATORS OF THE UNKNOWN PARAMETERS ARE DERIVED UNDER SQUARED ERROR LOSS FUNCTION. SINCE CLOSED-FORM EXPRESSIONS FOR THE BAYESIAN ESTIMATORS CANNOT BE OBTAINED, WE USE THE APPROXIMATION PROCEDURE FOR COMPUTING THEM. A REAL data SET REPRESENTS THE ANNUAL WAGES OF THE PRODUCTION-LINE WORKERS IS USED TO ILLUSTRATE THE PROPOSED RESULTS. AN IMPORTANT IMPLICATION OF THE PRESENT STUDY IS THAT THE EXPONENTIATED PARETO distribution, IN CONTRAST TO OTHER distributionS, FITS MORE APPROPRIATELY IN THE FINANCIAL data.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 176

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0
اطلاعات دوره: 
  • سال: 

    1401
  • دوره: 

    52
  • شماره: 

    4
  • صفحات: 

    269-280
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    139
  • دانلود: 

    12
چکیده: 

One of the obvious reasons for most disorders in network service provisioning is network path congestion. Congestion avoidance in today's networks is too costly and sometimes impossible. With the introduction of SDN, centralizing the equipment's control plane has become possible. This paper presents an enhanced method named ESV-DBRA to avoid congestion in multi-tenant SDN networks. At first, ESV-DBRA monitors the traffic load and delay of all network paths for each tenant individually. Then, by merging the parameters obtained from the monitoring, the Service Level Agreements (SLA), and a novel proposed cost function, it calculates the cost of the network paths per tenant. As a result, traffic for each tenant is routed through the path/paths at the lowest possible cost from the tenant's perspective. Next, the bandwidth quotas will be calculated and assigned to the tenants over their optimal routes. Afterward, whenever congestion is likely to occur in a path, ESV-DBRA automatically changes the route or bandwidth of the tenants' traffic related to this path to avoid congestion. Related algorithms are also proposed.Eventually, simulations show that the proposed method effectively increases bandwidth utilization by 10.76%.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 139

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 12 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1383
  • دوره: 

    9
تعامل: 
  • بازدید: 

    483
  • دانلود: 

    553
چکیده: 

حل جریان سیال در نواحی نزدیک دیواره یکی از موضوعات پیچیده می باشد که اکثر مدلهای جریان سیال در این ناحیه با مشکل مواجه می شوند این در حالی است که حل جریان در نواحی دور از دیواره به پیچیدگی نزدیک دیواره نیست. علت اصلی این مساله ظاهر شدن اثر ویسکوزیته و به وجود آمدن تنش برشی روی دیواره می باشد که همین مساله عامل اصلی تولید ورتیسیتی روی دیواره می باشد. روش گردابه تصادفی (RVM) که اساس آن تولید ورتکس صفحه ای (Vortex sheet) برای ارضای شرط عدم لغزش روی دیواره است در مناطق نزدیک دیواره از دقت خوبی برخوردار نیست. زیرا این روش نمی تواند توزیع تنش برشی روی دیواره را مدل کند. در این تحقیق یک مدل جدید برایت ولید ورتیسیتی معرفی شده است که اساس آن به جای ارضای شرط عدم لغزش، ارضای تنش برشی روی یک لایه نزدیک دیواره با در نظر گرفتن یک توزیع پیوسته از ورتیسیتی نزدیک دیواره بر اساس داشتن پروفیل خطی سرعت در این ناحیه می باشد. در این روش المانهای ورتیسیتی به تعدادی ورتکس حبابی شکسته شده و در اثر دیفیوژن با گرفتن یک مجموعه اعداد تصادفی که از حل قسمت دیفیوژن مساله ناشی می شوند به داخل جریان حرکت می کنند. این مدل برای حل جریان روی صفحه تخت در یک محدوده وسیع از اعداد رینولدز استفاده شده است تنش برشی روی دیواره و ضخامت لایه مرزی با نتایج بلازیوس مقایسه شده اند نتایج توافق و سازگاری قابل قبولی دارند.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 483

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 553
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button