Paper Information

Journal:   IRANIAN JOURNAL OF POLYMER SCIENCE AND TECHNOLOGY (PERSIAN)   DECEMBER-JANUARY 2004-2005 , Volume 17 , Number 5 (ISSUE NO. 73); Page(s) 307 To 313.
 
Paper: 

CURE OPTIMIZATION OF ASBESTOS REINFORCED PHENOLIC RESINS

 
 
Author(s):  BEHESHTI M.H., DELBARI H.
 
* 
 
Abstract: 

Phenolic resins are very well known for their high temperature and chemical resistance and good electrical properties. These thermoset resins are being used for a long time as friction materials, ablatives, decorative laminates and special domestic applications. The curing process of these resins, because of the required high temperature and pressure, is very complicated. The curing reaction mechanism of phenolic resins is a condensation type of reaction producing gaseous water or ammonia. The curing condition of this system is very important in order to eliminate any voids and achieve good mechanical properties. In this paper a preliminary curing cycle has been considered for a phenolic asbestos composite based on DSC thermograph of the resin. The effect of pressure, temperature and curing time on mechanical properties of this composite have been experimentally investigated. The optimized condition for achieving the highest mechanical properties has been determined. The results show that the optimum curing condition corresponds to 160oC, 60 bar pressure and 60 minutes for reaction time.

 
Keyword(s): 
 
References: 
  • ندارد
 
  Persian Abstract Yearly Visit 59
 
Latest on Blog
Enter SID Blog