SID.ir New Version

Paper Information

Journal:   JOURNAL OF METALLURGICAL AND MATERIALS ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING)   2018 , Volume 30 , Number 1 ; Page(s) 79 To 89.
 
Paper: 

The Effects Of Tool Rotational Speed On The Microstructure And Mechanical Properties Of Friction Stir Welded 7075-T6 Aluminum Thin Sheet

 
 
Author(s):  Mehri A., Abdollah Zadeh A.*, Entesari A., Assadi H., Wang J.T.
 
* 
 
Abstract: 
In the present research, FSW of thin sheets of the 7075-T6 aluminum alloy were investigated. Welding speed was held at 50 mm/min. The tool rotational speeds were 600, 1000 and 1600 rpm. The microstructure was investigated by both transmission electron microscope (TEM) and electron backscattered diffraction scans (EBSD). The results indicated that several phenomena occur instantly during FSW in the stir zone, such as precipitation, continuous dynamic recrystallization (CDRX), grain growth and precipitates dissolution which have a severe effect on the mechanical properties. It could also be concluded that for thin sheet of 7075-T6 aluminum alloy, plastic strain is the dominating factor over heat input of the FSW in determination of the microstructure of the weld zone.
 
Keyword(s): Friction stir welding,Aluminum alloys,Recrystallization,Mechanical properties,Precipitation
 
 
International related papers: 
  • No item.
 
Most related Highly related Moderately related Least related
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

MEHRI, A., & ABDOLLAH ZADEH, A., & Entesari, a., & ASSADI, H., & WANG, J. (2018). The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet. JOURNAL OF METALLURGICAL AND MATERIALS ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING), 30(1 ), 79-89. https://www.sid.ir/en/journal/ViewPaper.aspx?id=666998



Vancouver: Copy

MEHRI A., ABDOLLAH ZADEH A., Entesari a., ASSADI H., WANG J.T.. The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet. JOURNAL OF METALLURGICAL AND MATERIALS ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING). 2018 [cited 2022May20];30(1 ):79-89. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=666998



IEEE: Copy

MEHRI, A., ABDOLLAH ZADEH, A., Entesari, a., ASSADI, H., WANG, J., 2018. The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet. JOURNAL OF METALLURGICAL AND MATERIALS ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING), [online] 30(1 ), pp.79-89. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=666998.



 
 
Persian Abstract Yearly Visit 47
 
 
Latest on Blog
Enter SID Blog