Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF ISFAHAN DENTAL SCHOOL   SPRING 2018 , Volume 14 , Number 1 ; Page(s) 1 To 8.
 
Paper: 

EVALUATION THE EFFECT OF BASE METAL ALLOY RECASTING ON PORCELAIN-ALLOY BOND STRENGTH

 
 
Author(s):  MAHABADI MEYSAM, DARABI REZA, ABBASIAN MAHBOOBE*, VAFAIEE SHAGHAYEGH
 
* ISLAMIC AZAD UNIVERSITY, ISFAHAN (KHORASGAN) BRANCH, ISFAHAN, IRAN
 
Abstract: 

Introduction: Metal-ceramic restorations have been commonly used in dentistry. These restorations have both the esthetics of porcelain and the strength and durability of metal. Noble alloys and base-metal alloys are usually used for metal-ceramic restorations. Applications of base-metal alloys has been developed because of economic considerations, mechanical properties and low density. Remelting of used alloys is a common way in dental labs to reduce the costs of fixed prostheses. Few studies have been performed on the effect of recasting alloys on the metal-ceramic bond strength. The purpose of this study was to evaluate the effect of commond alloy recasting on metalceramic bond strength.
Materials & Methods: In this laboratory-experimental study, 23 waxed patterns in the size of 0.5
´3´25 millimeter were cut with bisturi blade. Wax patterns were sprued, burned out and casted with commend alloy. The second group has the same method although they consisted of equal amount of fresh alloy and alloy remnants cast only once, the third and fourth group contained 50% fresh alloy and 50% used alloy of last group. After sandblasting, grinding and surface preparation, porcelain application was done with Noritake porcelain. samples fractured with 3-point bending test by Universal Testing machine at the speed of 0.5 mm per minute. Finally, the results were analyzed by ANOVA (p value=0.007).
Results: The results indicate that the highest mean values of fracture strength of porcelain to metal was in the first group (30.9 N) and then squencely in the group 3 (28.7 N), group 2 (26.8) and group 4 (24.3 N).There is a significant difference between group 1 and 2 (p value=0.03), group 1 and 4 (p value=0.001) and group 3 and 4 (p value= 0.02). There was no significant difference between group 1, 3 (p value=0.26), group 2 and 3 (p value=0.3) and group 2 and 4 (p value=0.18).
Conclusion: Recasting of base metal alloys statistically decrease the bond strength of porcelain to metal.

 
Keyword(s): BASE METAL ALLOY, RECASTING, BOND STRENGTH
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

MAHABADI, M., & DARABI, R., & ABBASIAN, M., & VAFAIEE, S. (2018). EVALUATION THE EFFECT OF BASE METAL ALLOY RECASTING ON PORCELAIN-ALLOY BOND STRENGTH. JOURNAL OF ISFAHAN DENTAL SCHOOL, 14(1 ), 1-8. https://www.sid.ir/en/journal/ViewPaper.aspx?id=573130



Vancouver: Copy

MAHABADI MEYSAM, DARABI REZA, ABBASIAN MAHBOOBE, VAFAIEE SHAGHAYEGH. EVALUATION THE EFFECT OF BASE METAL ALLOY RECASTING ON PORCELAIN-ALLOY BOND STRENGTH. JOURNAL OF ISFAHAN DENTAL SCHOOL. 2018 [cited 2021July29];14(1 ):1-8. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=573130



IEEE: Copy

MAHABADI, M., DARABI, R., ABBASIAN, M., VAFAIEE, S., 2018. EVALUATION THE EFFECT OF BASE METAL ALLOY RECASTING ON PORCELAIN-ALLOY BOND STRENGTH. JOURNAL OF ISFAHAN DENTAL SCHOOL, [online] 14(1 ), pp.1-8. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=573130.



 
 
Persian Abstract Yearly Visit 102
 
 
Latest on Blog
Enter SID Blog