Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   MODARES MECHANICAL ENGINEERING   JULY 2017 , Volume 17 , Number 4 ; Page(s) 161 To 167.
 
Paper: 

THE INVESTIGATION OF THE EFFECTS OF DIMENSION’S AND MOLD’S TEMPERATURE ON BISTABILITY OF PVC/GLASS FIBER COMPOSITES

 
 
Author(s):  OFTADEH YUSEF, GOLZAR MOHAMMAD*
 
* FACULTY OF MECHANICAL ENGINEERING, TARBIAT MODARES UNIVERSITY, TEHRAN, IRAN
 
Abstract: 

In this research, in order to study effects of fabrication method the square-shaped bistable composites laminates with asymmetric layers were prepared and investigated. Different kinds of bistable composite laminates were fabricated by thermoplastic PVC and glass fibers and the effects of composites laminate dimensions and mold temperature were investigated. The maximum height of the bistable composite laminate is selected as the output of experiments. The results derived from ANOVA analysis showed that the dimensions of the laminates have the highest effects on bistability height and the effects of mold temperature are very low. It was also determined that with the larger dimensions of composite laminates and lower mold's temperature, the heights of bistability were higher. Also, these bistable composite laminates were simulated in ABAQUS and the simulation results were compared with the experimental results. The results indicated that simulation method anticipated the higher bistability height rather than the experimental results and the difference between these results is less than 10% in all specimens.

 
Keyword(s): BISTABLE COMPOSITE, COMPOSITES DIMENSIONS, MOLD TEMPERATURE, FIBER GLASS, PVC
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

OFTADEH, Y., & GOLZAR, M. (2017). THE INVESTIGATION OF THE EFFECTS OF DIMENSION’S AND MOLD’S TEMPERATURE ON BISTABILITY OF PVC/GLASS FIBER COMPOSITES. MODARES MECHANICAL ENGINEERING, 17(4 ), 161-167. https://www.sid.ir/en/journal/ViewPaper.aspx?id=572689



Vancouver: Copy

OFTADEH YUSEF, GOLZAR MOHAMMAD. THE INVESTIGATION OF THE EFFECTS OF DIMENSION’S AND MOLD’S TEMPERATURE ON BISTABILITY OF PVC/GLASS FIBER COMPOSITES. MODARES MECHANICAL ENGINEERING. 2017 [cited 2021July26];17(4 ):161-167. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=572689



IEEE: Copy

OFTADEH, Y., GOLZAR, M., 2017. THE INVESTIGATION OF THE EFFECTS OF DIMENSION’S AND MOLD’S TEMPERATURE ON BISTABILITY OF PVC/GLASS FIBER COMPOSITES. MODARES MECHANICAL ENGINEERING, [online] 17(4 ), pp.161-167. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=572689.



 
 
Persian Abstract Yearly Visit 43
 
 
Latest on Blog
Enter SID Blog