Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   MODARES MECHANICAL ENGINEERING   MARCH 2017 , Volume 16 , Number 12 ; Page(s) 186 To 194.
 
Paper: 

INVESTIGATING THE EFFECTS OF PROCESS PARAMETERS ON FORMING FORCES AND DEFECTS FORMATION IN TUBE SPINNING PROCESS OF AA6061

 
 
Author(s):  RASOOLI MOHAMMADALI, TAHERIZADEH ABOOZAR*, FARZIN MAHMOUD, ABDOLAH AMIR, NIROOMAND MOHAMMAD REZA
 
* DEPARTMENT OF MATERIALS ENGINEERING, ISFAHAN UNIVERSITY OF TECHNOLOGY, ISFAHAN, IRAN
 
Abstract: 

Tube spinning or flow forming process is used for manufacturing of seamless tubes widely put into service in advanced industries. The ideal flow for materials entering the deformation zone in this process is extrusion-type flow in axial direction. Very localized deformation zone which is confined by outer materials and forming tools is a very important aspect of this process. Therefore, developments of defects during the deformation process with undesirable flow of materials can easily occur. The main reason of undesirable flow of materials is choosing inappropriate process parameters which results in the occurrence of various geometrical and dimensional defects. In this paper, the effects of process parameters on formation and growth of different defects and their correlations with material flow and forming forces in tube spinning of AA6061 were investigated by using design of experiment (DOE) method. The results of experiments show that by applying the optimized values of reduction and feed rate per revolution, these defects can be controlled. Also, by comparing the experimentally measured and theoretically calculated forming forces it can be shown that the larger the deviation of measured forces from calculated ones the more severe the formation of defects and undesirable materials flow becomes.

 
Keyword(s): TUBE SPINNING, FLOW FORMING, AA6061, DEFECTS FORMATION, FORMING FORCES
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

RASOOLI, M., & TAHERIZADEH, A., & FARZIN, M., & ABDOLAH, A., & NIROOMAND, M. (2017). INVESTIGATING THE EFFECTS OF PROCESS PARAMETERS ON FORMING FORCES AND DEFECTS FORMATION IN TUBE SPINNING PROCESS OF AA6061. MODARES MECHANICAL ENGINEERING, 16(12 ), 186-194. https://www.sid.ir/en/journal/ViewPaper.aspx?id=572546



Vancouver: Copy

RASOOLI MOHAMMADALI, TAHERIZADEH ABOOZAR, FARZIN MAHMOUD, ABDOLAH AMIR, NIROOMAND MOHAMMAD REZA. INVESTIGATING THE EFFECTS OF PROCESS PARAMETERS ON FORMING FORCES AND DEFECTS FORMATION IN TUBE SPINNING PROCESS OF AA6061. MODARES MECHANICAL ENGINEERING. 2017 [cited 2021August04];16(12 ):186-194. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=572546



IEEE: Copy

RASOOLI, M., TAHERIZADEH, A., FARZIN, M., ABDOLAH, A., NIROOMAND, M., 2017. INVESTIGATING THE EFFECTS OF PROCESS PARAMETERS ON FORMING FORCES AND DEFECTS FORMATION IN TUBE SPINNING PROCESS OF AA6061. MODARES MECHANICAL ENGINEERING, [online] 16(12 ), pp.186-194. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=572546.



 
 
Persian Abstract Yearly Visit 35
 
 
Latest on Blog
Enter SID Blog