Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF ADVANCES IN ENVIRONMENTAL HEALTH RESEARCH   2017 , Volume 5 , Number 3; Page(s) 146 To 153.
 
Paper: 

FABRICATION, CHARACTERIZATION, AND MICROSCOPIC IMAGING OF FE 2O3-MODIFIED ELECTROSPUN NANOFIBERS

 
 
Author(s):  PORDEL MOHAMMAD AMIN, MALEKI AFSHIN*, KHAMFOROSH MEHRDAD, DARAEI HIUA, REZAEE REZA, DEHESTANI SAEED
 
* DEPARTMENT OF ENVIRONMENTAL HEALTH ENGINEERING, ENVIRONMENTAL HEALTH RESEARCH CENTER, KURDISTAN UNIVERSITY OF MEDICAL SCIENCES, SANANDAJ, IRAN
 
Abstract: 

This study explored the fabrication, characterization, and microscopic imaging of highly porous electrospun nanofibers based on pure and Fe2O3 nanoparticle modified polyacrylonitrile (PAN) fibers. The desired electrospinning mixture comprising polymer and nanoparticles in dimethyleformamide, was prepared. During electrospinning, the precursor solution was injected using a syringe pump. The empirical parameter influences, including nanoparticles dose, polymer weight percentage, and thickness as applied polymer syringe, were studied on the product morphology and uniformity. The products were analyzed by Fourier transform infrared (FT-IR) spectrophotometer, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results demonstrate that changes in the investigated empirical parameters cause fiber morphology variations and uniformity. Therefore, a strong interaction exists between Fe2O3 and PAN. In general, addition of nanoparticles to PAN solution resulted in a decrease in the average fiber diameter compared to pure PAN.

 
Keyword(s): ELECTROSPUN, NANOFIBROUS, PAN, FE2O3
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

PORDEL, M., & MALEKI, A., & KHAMFOROSH, M., & DARAEI, H., & REZAEE, R., & DEHESTANI, S. (2017). FABRICATION, CHARACTERIZATION, AND MICROSCOPIC IMAGING OF FE 2O3-MODIFIED ELECTROSPUN NANOFIBERS. JOURNAL OF ADVANCES IN ENVIRONMENTAL HEALTH RESEARCH, 5(3), 146-153. https://www.sid.ir/en/journal/ViewPaper.aspx?id=571322



Vancouver: Copy

PORDEL MOHAMMAD AMIN, MALEKI AFSHIN, KHAMFOROSH MEHRDAD, DARAEI HIUA, REZAEE REZA, DEHESTANI SAEED. FABRICATION, CHARACTERIZATION, AND MICROSCOPIC IMAGING OF FE 2O3-MODIFIED ELECTROSPUN NANOFIBERS. JOURNAL OF ADVANCES IN ENVIRONMENTAL HEALTH RESEARCH. 2017 [cited 2021July26];5(3):146-153. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=571322



IEEE: Copy

PORDEL, M., MALEKI, A., KHAMFOROSH, M., DARAEI, H., REZAEE, R., DEHESTANI, S., 2017. FABRICATION, CHARACTERIZATION, AND MICROSCOPIC IMAGING OF FE 2O3-MODIFIED ELECTROSPUN NANOFIBERS. JOURNAL OF ADVANCES IN ENVIRONMENTAL HEALTH RESEARCH, [online] 5(3), pp.146-153. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=571322.



 
  pdf-File
Yearly Visit 53
 
 
Latest on Blog
Enter SID Blog