Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF CIVIL ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING)   2017 , Volume 29 , Number 2 ; Page(s) 1 To 12.
 
Paper: 

BEARING CAPACITY OF STRIP FOOTINGS IN VARIOUS LOCATIONS WITH RESPECT TO SLOPING GROUND

 
 
Author(s):  HAGHBIN M.*
 
* 
 
Abstract: 

The purpose of footing design is transferring structure load to soil without causing shear failure and extra settlement in soil. Therefore, footing bearing capacity should be considered in various projects. In special case, footings are placed in various positions with respect to slope ground and position of ground slope affects footing bearing capacity. In fact, slope affects failure surface of soil beneath the foundation remarkably and therefore, footing location with respect to slope must be cared to determine exact footing bearing capacity. In present paper, analytical method is presented based on soil stability beneath the footing. Virtual retaining wall method is used in present study and by applying equilibrium between active and passive forces on virtual wall, footing bearing capacity on reinforced and unreinforced soils is determined in various positions with respect to slope ground. Also, varied parameters include soil resistance, footing spacing with respect to slope ground, width and depth of foundation and seismic coefficient. Results indicate, in various depths and widths of foundation, bearing capacity of footing on flat ground is more than top of slope and bearing capacity of footing top of slope is more than down of slope. Also, bearing capacity of footing on slope is minimum. Based on proposed method, footing location with respect to slope affects passive and active force on virtual retaining wall and footing bearing capacity remarkably. Also, the proposed method can determine effect of slope angle and reinforcement on footing bearing capacity. Presented method indicates effective distance from slope crest is almost 4.5B. Finally, the predicted results are compared with those reported from analytical and experimental methods performed by others, indicating an acceptable agreement.

 
Keyword(s): FOOTING BEARING CAPACITY, SLOPE GROUND, SEISMIC COEFFICIENT, FOOTING SPACING, DEPTH AND WIDTH OF FOOTING
 
 
References: 
  • Not Registered.
  •  
 
+ Click to Cite.
APA: Copy

HAGHBIN, M. (2017). BEARING CAPACITY OF STRIP FOOTINGS IN VARIOUS LOCATIONS WITH RESPECT TO SLOPING GROUND. JOURNAL OF CIVIL ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING), 29(2 ), 1-12. https://www.sid.ir/en/journal/ViewPaper.aspx?id=568748



Vancouver: Copy

HAGHBIN M.. BEARING CAPACITY OF STRIP FOOTINGS IN VARIOUS LOCATIONS WITH RESPECT TO SLOPING GROUND. JOURNAL OF CIVIL ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING). 2017 [cited 2021May16];29(2 ):1-12. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=568748



IEEE: Copy

HAGHBIN, M., 2017. BEARING CAPACITY OF STRIP FOOTINGS IN VARIOUS LOCATIONS WITH RESPECT TO SLOPING GROUND. JOURNAL OF CIVIL ENGINEERING (JOURNAL OF SCHOOL OF ENGINEERING), [online] 29(2 ), pp.1-12. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=568748.



 
 
Persian Abstract Yearly Visit 53
 
Latest on Blog
Enter SID Blog