Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF DENTOMAXILLOFACIAL RADIOLOGY, PATHOLOGY AND SURGERY   SPRING 2016 , Volume 5 , Number 1; Page(s) 24 To 29.
 
Paper: 

A COMPARISON OF HEAT GENERATION IN DIFFERENT DEPTHS OF IMPLANT DRILLING SITE WITH AND WITHOUT A SLEEVE

 
 
Author(s):  VAFAEE FARIBORZ, FIROUZ FARNAZ, KHOSHHAL KHOJASTEH ZANJANI MASOUMEH, MOSHIRI ZAHRA, RANJZAD HADI*
 
* DEPARTMENT OF PROSTHODONTICS, SCHOOL OF DENTAL MEDICINE, HAMADAN UNIVERSITY OF MEDICAL SCIENCES (UHSHA), HAMADAN, IRAN
 
Abstract: 

Introduction: The purpose of this study was to compare the heat generated from different depths of an implant drilling site with and without a sleeve.
Materials and methods: In this study, 60 cortical bone samples were used and a load of 2.0 kg was applied. rilling for implant surgery, we used a diameter of 4.3 mm and a normal sleeve. Heat was measured from 3 different depths (3,6, and 9 mms). Data was analyzed with a three-way analysis of variance by Newman–Keulsmultiple comparison procedure. The significance level was set to a p-value of 0.05.
Results: The mean maximum temperature with a sleeve was 35.4°C and without a sleeve was 34.5°C. Thermal rise was lowest in the sleeve group and highest in the sleeveless group. There was a significant difference between the sleeve and nonsleeve group (P= 0.002). There was also no significant differences between the different depths of the three measurements (P= 0.068).
Conclusion: Within the scope of this invitro study, thermal rise during implant site preparation was lower in conventional drilling compared to the use of a sleeve. Hence, the difference was statistically significant.

 
Keyword(s): DENTAL IMPLANTS, DENTAL IMPLANTATION, TEMPERATURE
 
 
References: 
  • ندارد
  •  
 
Click to Cite.
APA: Copy

VAFAEE, F., & FIROUZ, F., & KHOSHHAL KHOJASTEH ZANJANI, M., & MOSHIRI, Z., & RANJZAD, H. (2016). A COMPARISON OF HEAT GENERATION IN DIFFERENT DEPTHS OF IMPLANT DRILLING SITE WITH AND WITHOUT A SLEEVE. JOURNAL OF DENTOMAXILLOFACIAL RADIOLOGY, PATHOLOGY AND SURGERY, 5(1), 24-29. https://www.sid.ir/en/journal/ViewPaper.aspx?id=508277



Vancouver: Copy

VAFAEE FARIBORZ, FIROUZ FARNAZ, KHOSHHAL KHOJASTEH ZANJANI MASOUMEH, MOSHIRI ZAHRA, RANJZAD HADI. A COMPARISON OF HEAT GENERATION IN DIFFERENT DEPTHS OF IMPLANT DRILLING SITE WITH AND WITHOUT A SLEEVE. JOURNAL OF DENTOMAXILLOFACIAL RADIOLOGY, PATHOLOGY AND SURGERY. 2016 [cited 2021May14];5(1):24-29. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=508277



IEEE: Copy

VAFAEE, F., FIROUZ, F., KHOSHHAL KHOJASTEH ZANJANI, M., MOSHIRI, Z., RANJZAD, H., 2016. A COMPARISON OF HEAT GENERATION IN DIFFERENT DEPTHS OF IMPLANT DRILLING SITE WITH AND WITHOUT A SLEEVE. JOURNAL OF DENTOMAXILLOFACIAL RADIOLOGY, PATHOLOGY AND SURGERY, [online] 5(1), pp.24-29. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=508277.



 
  pdf-File
Yearly Visit 302
 
Latest on Blog
Enter SID Blog