Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING   2016 , Volume 12 , Number 27; Page(s) 17 To 26.
 
Paper: 

EFFECT OF SURFACE OXIDATION ON NICKEL ALUMINIDE ALLOY IC221M, AS A REPLACEMENT FOR SEPARATOR PLATES IN MOLTEN CARBONATE FUEL CELL

 
 
Author(s):  ABDOUS H.*, SOLTANIEH M., BANNA MOTAJADDED H.
 
* DEPARTMENT OF MATERIALS ENGINEERING, IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY
 
Abstract: 

Corrosion behavior of self-coated Nickel Aluminide IC221M alloys were examined in molten carbonate media with LiNaCO3 eutectic composition, to investigate the possibility of usage in wet-seal area in molten carbonate fuel cell. The desired temperature and time of oxidation process assigned as 1000oC and 25 hours respectively. Self-coating process resulted the formation of NiO, NiAl2O4, ZrO2 and Al2O3 in order, from the outer interface. Under these compounds, in the substrate interface, an Aluminum depleted zone (ADZ) was observed. Oxide compounds together with this layer, perform as a barrier for alloying elements outward diffusion. After immersion test, more stable compounds such as NiCO3, LiAlO2 and CrO3, Na2CrO4 (formed by Cr diffusion), were observed above the ADZ. Weight-gain rate between the 100 to 215 hours of immersion test were estimated 2*10-5 g.cm-2.hrs-1 with a decreasing trend by time progress; which means that the mentioned stable compounds, provide a suitable corrosion resistance in Base alloy, after formation of required amount.

 
Keyword(s): MOLTEN CARBONATE FUEL CELL, SEPARATOR PLATES, IC211M ALLOY, HIGH TEMPERATURE SELF-COATING
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

ABDOUS, H., & SOLTANIEH, M., & BANNA MOTAJADDED, H. (2016). EFFECT OF SURFACE OXIDATION ON NICKEL ALUMINIDE ALLOY IC221M, AS A REPLACEMENT FOR SEPARATOR PLATES IN MOLTEN CARBONATE FUEL CELL. IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 12(27), 17-26. https://www.sid.ir/en/journal/ViewPaper.aspx?id=508172



Vancouver: Copy

ABDOUS H., SOLTANIEH M., BANNA MOTAJADDED H.. EFFECT OF SURFACE OXIDATION ON NICKEL ALUMINIDE ALLOY IC221M, AS A REPLACEMENT FOR SEPARATOR PLATES IN MOLTEN CARBONATE FUEL CELL. IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING. 2016 [cited 2021August05];12(27):17-26. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=508172



IEEE: Copy

ABDOUS, H., SOLTANIEH, M., BANNA MOTAJADDED, H., 2016. EFFECT OF SURFACE OXIDATION ON NICKEL ALUMINIDE ALLOY IC221M, AS A REPLACEMENT FOR SEPARATOR PLATES IN MOLTEN CARBONATE FUEL CELL. IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING, [online] 12(27), pp.17-26. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=508172.



 
 
Persian Abstract Yearly Visit 51
 
 
Latest on Blog
Enter SID Blog