Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT (IJIE) (INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE) (PERSIAN)   Fall 2003 , Volume 14 , Number 4; Page(s) 107 To 121.
 
Paper: 

ANALYSIS, MODELING AND TESTING OF PNEUMA TIC VALVE OF LOCOMOTIVE

 
 
Author(s):  MOHTASEBI S.S., LASHKARI M.
 
* 
 
Abstract: 

Independent brake valve, is a diaphragm pneumatic valve with low out-flow and self lapping property. By moving valve handle, the valve delivers reserved compressed air to other sections of the system. The pressure of output flow is adjusted based on pre-set pressure of a spring which is usually between 45-50 psi. In this paper, first, the valve is described and analyzed based on its functionality. Then, the mathematical equations of various sections of valve are presented. After that and based on those equations, the mathematical model of the whole valve is derived. To evaluate the model, the results obtained from simulation are compared to the experimental results. After validation of the model, it is used as a reference to evaluate the functionality of the valve at different operating conditions. In general, investigation on the steady state and also transient response of the valve is the main objective of this research.

 
Keyword(s): 
 
 
References: 
  • ندارد
  •  
 
Click to Cite.
APA: Copy

MOHTASEBI, S., & LASHKARI, M. (2003). ANALYSIS, MODELING AND TESTING OF PNEUMA TIC VALVE OF LOCOMOTIVE. INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT (IJIE) (INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE) (PERSIAN), 14(4), 107-121. https://www.sid.ir/en/journal/ViewPaper.aspx?id=4959



Vancouver: Copy

MOHTASEBI S.S., LASHKARI M.. ANALYSIS, MODELING AND TESTING OF PNEUMA TIC VALVE OF LOCOMOTIVE. INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT (IJIE) (INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE) (PERSIAN). 2003 [cited 2021May14];14(4):107-121. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=4959



IEEE: Copy

MOHTASEBI, S., LASHKARI, M., 2003. ANALYSIS, MODELING AND TESTING OF PNEUMA TIC VALVE OF LOCOMOTIVE. INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT (IJIE) (INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE) (PERSIAN), [online] 14(4), pp.107-121. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=4959.



 
 
Yearly Visit 55 Persian Abstract
 
Latest on Blog
Enter SID Blog