Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TABRIZ)   FALL 2008 , Volume 36 , Number 2 (54) MECHANICAL ENGINEERING; Page(s) 11 To 18.
 
Paper: 

NUMERICAL AND EXPERIMENTAL INVESTIGATION ON FORMING METALLIC BELLOWS IN CLOSED AND OPEN-DIE HYDROFORMING

 
 
Author(s):  ELYASI M., BAKHSHI M., GORJI A.H.
 
* 
 
Abstract: 
In this paper, the possibility of forming the metallic bellows in closed-die, and also in open-die, tube hydroforming process has been studied by numerical simulation and experiment. The results obtained illustrated that forming the tube in the closed-die process is only possible for a single-convolution bellows. when the tube is fed from one end; if the feeding is performed from both the ends, then the process is also possible for a double convolution bellows. If the number of convolutions is more than two, then it is impossible to form the bellows in the closed-die process. But, in forming the bellows in the open-die tube hydroforming, there is no limitation on the number of convolutions.
 
Keyword(s): METAL FORMING, TUBE HYDROFORMING, BELLOWS, FEM SIMULATION
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

ELYASI, M., & BAKHSHI, M., & GORJI, A. (2008). NUMERICAL AND EXPERIMENTAL INVESTIGATION ON FORMING METALLIC BELLOWS IN CLOSED AND OPEN-DIE HYDROFORMING. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TABRIZ), 36(2 (54) MECHANICAL ENGINEERING), 11-18. https://www.sid.ir/en/journal/ViewPaper.aspx?id=277131



Vancouver: Copy

ELYASI M., BAKHSHI M., GORJI A.H.. NUMERICAL AND EXPERIMENTAL INVESTIGATION ON FORMING METALLIC BELLOWS IN CLOSED AND OPEN-DIE HYDROFORMING. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TABRIZ). 2008 [cited 2021September29];36(2 (54) MECHANICAL ENGINEERING):11-18. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=277131



IEEE: Copy

ELYASI, M., BAKHSHI, M., GORJI, A., 2008. NUMERICAL AND EXPERIMENTAL INVESTIGATION ON FORMING METALLIC BELLOWS IN CLOSED AND OPEN-DIE HYDROFORMING. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TABRIZ), [online] 36(2 (54) MECHANICAL ENGINEERING), pp.11-18. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=277131.



 
 
Persian Abstract Yearly Visit 59
 
 
Latest on Blog
Enter SID Blog