Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   INTERNATIONAL JOURNAL OF ENGINEERING   FEBRUARY 2004 , Volume 17 , Number 1 (TRANSACTIONS A: BASICS); Page(s) 1 To 10.
 
Paper: 

NEW STILLING BASINS DESIGNS FOR DEEP RECTANGULAR OUTLETS

 
 
Author(s):  VERMA D.V.S., GOEL A., RAI V.
 
* 
 
Abstract: 
The experimental study reported here is intended to evolve new designs basins for deep and narrow openings used as outlets. Several appurtenances such as grid, Impact wall, stepped wall, weir wall, sloping end sill and wegde shaped blocks are used to study their influence on the hydraulic performance of the stilling basins with an aim to propose efficient stilling basin models. All the models were tested at inflow Froude number Fr = 4.89 keeping a constant run time and same erodible bed material for each stilling basin model for comparison of the performance. The performance of each model was evaluated by observing the maximum depth of scour and its location after the end sill. A non-dimensional number named as Scour Index has been evolved for comparing the performance of the different stilling basin models. The use of wedge shaped blocks as a splitter block and baffle blocks reduced the depth of scour indicating a significant dissipation of energy and good flow conditions, downstream of the stilling basin.
 
Keyword(s): RECTANGULAR OPENINGS, STILLING BASIN, WEDGE SHAPED BLOCKS
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

VERMA, D., & GOEL, A., & RAI, V. (2004). NEW STILLING BASINS DESIGNS FOR DEEP RECTANGULAR OUTLETS. INTERNATIONAL JOURNAL OF ENGINEERING, 17(1 (TRANSACTIONS A: BASICS)), 1-10. https://www.sid.ir/en/journal/ViewPaper.aspx?id=2242



Vancouver: Copy

VERMA D.V.S., GOEL A., RAI V.. NEW STILLING BASINS DESIGNS FOR DEEP RECTANGULAR OUTLETS. INTERNATIONAL JOURNAL OF ENGINEERING. 2004 [cited 2021June20];17(1 (TRANSACTIONS A: BASICS)):1-10. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=2242



IEEE: Copy

VERMA, D., GOEL, A., RAI, V., 2004. NEW STILLING BASINS DESIGNS FOR DEEP RECTANGULAR OUTLETS. INTERNATIONAL JOURNAL OF ENGINEERING, [online] 17(1 (TRANSACTIONS A: BASICS)), pp.1-10. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=2242.



 
  pdf-File
Yearly Visit 60
 
 
Latest on Blog
Enter SID Blog