Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN)   NOVEMBER 2007 , Volume 41 , Number 4 (106); Page(s) 431 To 442.
 
Paper: 

SUCTION EFFECT ON A HALF MODEL PRESSURE DISTRIBUTION

 
 
Author(s):  SOLTANI M.R.*, POULI BABAEI MAMEGHANI A., BAKHSH ALIPOUR A.
 
* DEPT. OF AEROSPACE ENGINEERING, SHARIF UNIVERSITY OF TECHNOLOGY, I.R. IRAN
 
Abstract: 

An extensive experimental study has been performed to investigate the wind tunnel sidewall effect and the boundary layer suction on a half model pressure distribution. A three-dimensional half wing was made according to its full span model. The wing was tested at angles of attack ranging from a= -5 to 25 degree and at Reynolds numbers of 0.5*106, 1.0*106 and 1.3*106 in a subsonic wind tunnel. Experimental results such as static pressure distribution, lift coefficient, and wake are compared with the corresponding 2-D results from that of similar model. Wind tunnel sidewall boundary layer suction effects on the surface static pressure distribution have been studied at various conditions has been studied. The results show that the flow over the portion of the model affected by the sidewall pressure separates at an angle of attack which is smaller than the corresponding angle for other portion of the wing. This phenomenon yields an increase in the drag coefficient and a noticeable decrease in the value of the lift coefficient. However, when suction was applied to the sidewall, separation was delayed to higher angles, and the corresponding aerodynamic loads varied significantly.

 
Keyword(s): HALF MODEL, WIND TUNNEL, PRESSURE DISTRIBUTION, BOUNDARY LAYER, SUCTION, WAKE
 
References: 
  • ندارد
 
  Persian Abstract Yearly Visit 75
 
Latest on Blog
Enter SID Blog