Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF MECHANICAL ENGINEERING   WINTER 2021 , Volume 50 , Number 4 (93) ; Page(s) 191 To 200.
 
Paper: 

Numerical Analaysis of Shaped Holes Filmcooling for Leading Edge of A Gas Turbine Blade

 
 
Author(s):  MAHMOUDI M.*, PIRKANDI J., Shadravan M., Zahiri Minabi M.R.
 
* Department of Aerospace Engineering, Malek Ashtar University of Technology,Tehran, Iran
 
Abstract: 
This study investigates the performance of Cylindrical-conical-and clover-shaped film cooling holes of gas turbine blades and the effect of transverse trench on film cooling hole efficiency. The purpose of the research was to achieve the optimal film cooling geometry in order to gain the highest film cooling hole of gas turbine blade efficiency. In this study, a three-dimensional blade simulation that based on k-e realizable turbulence model. Cooling fluid was injected into the mainstream at 30◦ on leading edge stagnation row, with BR=1, 1. 5, 2. After injecting the cooling fluid into Cylindrical-conical-and clover-shaped film cooling holes geometries with and without the presence of transverse trench, it was observed that clover-shaped hole with transverse trench along, at BR=2 and film cooling efficiency of 0. 147 offers the highest film cooling efficiency. Investigation on transverse trench effect for all geometries showed that the presence of trench leads to a higher film cooling efficiency.
 
Keyword(s): film cooling,gas turbine blade,cooling effectiveness,shaped cooling hole,cooling losses
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

MAHMOUDI, M., & PIRKANDI, J., & Shadravan, M., & Zahiri Minabi, M. (2021). Numerical Analaysis of Shaped Holes Filmcooling for Leading Edge of A Gas Turbine Blade. JOURNAL OF MECHANICAL ENGINEERING, 50(4 (93) ), 191-200. https://www.sid.ir/en/journal/ViewPaper.aspx?id=737439



Vancouver: Copy

MAHMOUDI M., PIRKANDI J., Shadravan M., Zahiri Minabi M.R.. Numerical Analaysis of Shaped Holes Filmcooling for Leading Edge of A Gas Turbine Blade. JOURNAL OF MECHANICAL ENGINEERING. 2021 [cited 2021December01];50(4 (93) ):191-200. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=737439



IEEE: Copy

MAHMOUDI, M., PIRKANDI, J., Shadravan, M., Zahiri Minabi, M., 2021. Numerical Analaysis of Shaped Holes Filmcooling for Leading Edge of A Gas Turbine Blade. JOURNAL OF MECHANICAL ENGINEERING, [online] 50(4 (93) ), pp.191-200. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=737439.



 
 
Yearly Visit 52
 
 
Latest on Blog
Enter SID Blog