Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   MODARES MECHANICAL ENGINEERING   august 2019 , Volume 19 , Number 8 ; Page(s) 2001 To 2011.
 
Paper: 

Modeling and Simulation of Fuel Sloshing in Tank by Pendulum Model

 
 
Author(s):  Naseh H.*, Alipour A., Daneshgar P.
 
* Aerospace Research Institute, Ministry of Science, Research and Technology, Tehran, Iran
 
Abstract: 
The aim of this article is to present the methodology for modeling and simulation of start effects in spacecraft or satellite’ s propulsion system on the fuel sloshing in the tank by pendulum model in microgravity conditions. In other words, the main aim of this paper is pure sloshing study of fuel and ullage gas relative movement, neglecting the role of Propellant Management Device (PMD). To this end, fuel sloshing in tank is performed by utilizing the Fluent software based on pendulum model. Firstly, algorithm inputs are determined (exiting input, fuel and ullage gas volume, loading, dimensional specifications, etc. ); then, tank is modeled and designed and, finally, fuel sloshing simulation in micro-gravity conditions is developed. Fuel sloshing modeling and simulation outputs include determining the sloshing damping rate and its value in the simulation at 20 sec, velocity variation contour, velocity direction contour in the tank, and also ullage gas and fuel relative location in 0. 2, 0. 4, and 1 sec. The accuracy of the obtained results has been evaluated with the similar experimental results.
 
Keyword(s): Fuel Sloshing,Simulation and Modeling,Pendulum Model,Gravity
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

NASEH, H., & ALIPOUR, A., & DANESHGAR, P. (2019). Modeling and Simulation of Fuel Sloshing in Tank by Pendulum Model. MODARES MECHANICAL ENGINEERING, 19(8 ), 2001-2011. https://www.sid.ir/en/journal/ViewPaper.aspx?id=734671



Vancouver: Copy

NASEH H., ALIPOUR A., DANESHGAR P.. Modeling and Simulation of Fuel Sloshing in Tank by Pendulum Model. MODARES MECHANICAL ENGINEERING. 2019 [cited 2021December03];19(8 ):2001-2011. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=734671



IEEE: Copy

NASEH, H., ALIPOUR, A., DANESHGAR, P., 2019. Modeling and Simulation of Fuel Sloshing in Tank by Pendulum Model. MODARES MECHANICAL ENGINEERING, [online] 19(8 ), pp.2001-2011. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=734671.



 
 
Yearly Visit 43
 
 
Latest on Blog
Enter SID Blog