Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN)   FEBRUARY 2007 , Volume 40 , Number 7 (101); Page(s) 999 To 1004.
 
Paper: 

Effect Of Thermomechnical Treatment On Morphology Of Silicon Phase On Al-Si-Mg Alloys

 
 
Author(s):  Hemati A., Zarei Hanzaki A.*
 
* SCHOOL OF METALLURGY & MATERIAL ENGINEERING, UNIVERSITY COLLEGE OF ENGINEERING, UNIVERSITY OF TEHRAN, I.R. IRAN
 
Abstract: 
Aluminum-silicon-magnesium (Al-Si- Mg) alloys, due to their excellent cast ability and high strength-to-weight ratio, are the most widely used aluminum foundry alloys. This alloy is extensively used in aerospace and automotive industries. The cast microstructure of these alloys consists of a primary phase, aluminum or silicon and a eutectic mixture of these two microcomponents.In addition, the mechanical properties of these alloys are mainly dictated by the characteristics of eutectic microcomponents in the microstructure. Furthermore, many investigations have been conducted on the semi-solid macrostructures to control the matrix (Al-alpha) and eutectic phase (silicon) morphologies.As the thermomechanical treatment (TMT) is one of the most effective materials processing techniques, the objective of this research was to study the influence of TMT parameters on Si morphology in aluminum 356 alloys with two semisolid and conventional casting macrostructures. Therefore, hot compression tests have been carried out in a range of temperature (420°C to 540°C) and strain rate (0.1, 0.01, and 0.001 sec-1). The results indicated that the morphology of Si phase was changed from acicular to spherical shape and:1. The observed dynamic flow softening was mainly related to silicon platelets fragmentation and spheroidization. 2. The faults driving force approach was adapted to explain the silicon platelets fragmentation and spheroidization under deformation at high temperatures. 3. Maximum UTS and El for alloy in 540°C, 0.1 sec-1 and 540°C, 0.001 sec-1 respectively.
Keyword(s): 
 
 
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

HEMATI, A., & ZAREI HANZAKI, A. (2007). EFFECT OF THERMOMECHNICAL TREATMENT ON MORPHOLOGY OF SILICON PHASE ON AL-SI-MG ALLOYS. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN), 40(7 (101)), 999-1004. https://www.sid.ir/en/journal/ViewPaper.aspx?id=72507



Vancouver: Copy

HEMATI A., ZAREI HANZAKI A.. EFFECT OF THERMOMECHNICAL TREATMENT ON MORPHOLOGY OF SILICON PHASE ON AL-SI-MG ALLOYS. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN). 2007 [cited 2022January17];40(7 (101)):999-1004. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=72507



IEEE: Copy

HEMATI, A., ZAREI HANZAKI, A., 2007. EFFECT OF THERMOMECHNICAL TREATMENT ON MORPHOLOGY OF SILICON PHASE ON AL-SI-MG ALLOYS. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN), [online] 40(7 (101)), pp.999-1004. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=72507.



 
International related papers: 
 
 
Yearly Visit 41
 
 
Latest on Blog
Enter SID Blog