SID.ir New Version

Paper Information

Journal:   IRANIAN JOURNAL OF MANUFACTURING ENGINEERING   fall 2017-winter 2018 , Volume 4 , Number 2 ; Page(s) 61 To 68.
 
Paper: 

Evaluation And Measurement Of The Residual Stresses In Stainless Steel Pipes And Investigation Of The Effects Of Wall Thickness On The Stresses Distribution

 
 
Author(s):  Charkhi Mehran, Akbari Davood*
 
* Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
 
Abstract: 
In this paper, thermo-mechanical behavior of the welding process was analyzed to determine the effect of wall thickness on the residual stress magnitude and distribution in the stainless steel pipes. In order to verify the model, experimental data for the steel pipes, obtained by Deng with deep hole drilling method, were utilized. Good agreement was observed between the finite element and experimental data. The results indicated that the developed computational method is an effective tool to predict the residual stress of similar weld joints. The present finite element model was developed in a butt-welded pipe to consider the effect of pipe wall-thickness. It was observed that by increasing the preheating temperature in the repair welded pipes, tensile axial residual stresses on the inner surface and compressive axial residual stresses on the outer surface of the stainless steel pipes decreased about 35 and 25 percent, but the compressive axial residual stresses on the inner surface and tensile stresses on the outer surface have small variation. Moreover, by increasing the wall thickness of pipe compressive hoop residual stresses on the inner surface on the stainless steel increased, but only a small variation was observed on the tensile hoop residual stresses. In general, there is no significant effect on the magnitude and distribution of hoop residual stresses on the inner surface of the stainless steel pipe. Also, high wall thickness will have wider distribution of axial residual stresses.
 
Keyword(s): Residual stresses, Wall thickness, FEM analysis
 
 
International related papers: 
 
Most related Highly related Moderately related Least related
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
  • Not Registered.
 
+ Click to Cite.
APA: Copy

CHARKHI, M., & AKBARI, D. (2018). Evaluation and measurement of the residual stresses in stainless steel pipes and investigation of the effects of wall thickness on the stresses distribution. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, 4(2 ), 61-68. https://www.sid.ir/en/journal/ViewPaper.aspx?id=655746



Vancouver: Copy

CHARKHI MEHRAN, AKBARI DAVOOD. Evaluation and measurement of the residual stresses in stainless steel pipes and investigation of the effects of wall thickness on the stresses distribution. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING. 2018 [cited 2022May29];4(2 ):61-68. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=655746



IEEE: Copy

CHARKHI, M., AKBARI, D., 2018. Evaluation and measurement of the residual stresses in stainless steel pipes and investigation of the effects of wall thickness on the stresses distribution. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, [online] 4(2 ), pp.61-68. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=655746.



 
 
Persian Abstract Yearly Visit 48
 
 
Latest on Blog
Enter SID Blog