Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   IRANIAN JOURNAL OF MANUFACTURING ENGINEERING   summer 2016 , Volume 3 , Number 2 ; Page(s) 45 To 53.
 
Paper: 

Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model

 
 
Author(s):  TAHERI MOEIN*
 
* Department of Mechanical Engineering, Arak University, Arak, Iran
 
Abstract: 
Nanomanipulation process using atomic force microscopy is one of the new methods in manufacturing. This process has been seriously considered by researchers. Due to very high precision in the manufacture of devices for micro/nano-exist, accurate modeling process will have a significant impact on the construction of the devices. Also, due to the high cost of using atomic force microscopy manufacturing micro/nano-devices, it is necessary to first model this process was carefully done and then enters the construction areas. So far, many researchers have focused on modeling manipulation, most of their research, in conjunction with the 2D manipulation and been made using simple models of friction. Since the real manipulation in micro/nano-devices manufacturing is done in 3D environment and also given that the transition from the macro to the micro/nano, surface forces such as friction are important, therefore, in this paper, for the first time, LuGre friction model, in 3D manipulation modeling has been used. The results, indicating a decrease critical force and time manipulation using LuGre friction model versus the simple models, this is due to the fact that the LuGre friction model contained actual contact area, while other models involve nominal contact surface. Also, compare the 3D results obtained by 2D results show an increase in critical force and time that was due to the increase in surface area is proof of the accuracy of modeling.
 
Keyword(s): Micro/nano-devices manufacturing, 3D nanomanipulation, Dynamic modeling, LuGre friction model
 
 
References: 
  • ندارد
  •  
 
Cite:
APA: Copy

TAHERI, M. (2016). Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, 3(2 ), 45-53. https://www.sid.ir/en/journal/ViewPaper.aspx?id=655646



Vancouver: Copy

TAHERI MOEIN. Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING. 2016 [cited 2021April18];3(2 ):45-53. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=655646



IEEE: Copy

TAHERI, M., 2016. Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, [online] 3(2 ), pp.45-53. Available at: <https://www.sid.ir/en/journal/ViewPaper.aspx?id=655646>.



 
 
Yearly Visit 50 Persian Abstract
 
Latest on Blog
Enter SID Blog