Click for new scientific resources and news about Corona[COVID-19]

Paper Information

Journal:   IRANIAN JOURNAL OF MANUFACTURING ENGINEERING   summer 2016 , Volume 3 , Number 2 ; Page(s) 19 To 25.
 
Paper: 

Improvement in mechanical properties of 2024 Al alloy through combination of heat treatment and cold rolling

 
 
Author(s):  Mohajer Mohsen, MIRZAKHANI BAHMAN*, MODABBERIFAR MEHDI, MOMENI HOSEIN
 
* Faculty of Engineering, Arak University, Arak, Iran
 
Abstract: 
AA2024 alloy has high strength but low formability. Therefore there is a difficulty during forming processes of the alloy such as rolling, because high capacity of rolling machine is required. So, achievements in good mechanical properties in this alloy besides the improvement in ductility during cold rolling are the main challenges for industries. The objective of this paper is to improve mechanical properties of 2024 aluminum alloy by using a combination of cold rolling and precipitation hardening. To do this, the hot rolled strip of the alloy first solutionized at495 ̊ C for an hour and immediately quenched in cold water. The samples were then subjected to 15, 30 and 50 percent reduction by rolling at room temperatures. The cold worked samples were then natural aged for a week. The tensile test and Brinell hardness test were conducted and microstructural study was carried out by metallography. The results indicate that, the 30% cold rolled sample has the maximum strength and hardness in comparison to the T4 or T3 samples.
 
Keyword(s): 2024 Aluminum alloy, Cold roll, Mechanical properties
 
 
References: 
  • ندارد
  •  
 
Cite:
APA: Copy

Mohajer, M., & MIRZAKHANI, B., & MODABBERIFAR, M., & MOMENI, H. (2016). Improvement in mechanical properties of 2024 Al alloy through combination of heat treatment and cold rolling. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, 3(2 ), 19-25. https://www.sid.ir/en/journal/ViewPaper.aspx?id=655638



Vancouver: Copy

Mohajer Mohsen, MIRZAKHANI BAHMAN, MODABBERIFAR MEHDI, MOMENI HOSEIN. Improvement in mechanical properties of 2024 Al alloy through combination of heat treatment and cold rolling. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING. 2016 [cited 2021April21];3(2 ):19-25. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=655638



IEEE: Copy

Mohajer, M., MIRZAKHANI, B., MODABBERIFAR, M., MOMENI, H., 2016. Improvement in mechanical properties of 2024 Al alloy through combination of heat treatment and cold rolling. IRANIAN JOURNAL OF MANUFACTURING ENGINEERING, [online] 3(2 ), pp.19-25. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=655638.



 
 
Yearly Visit 69 Persian Abstract
 
Latest on Blog
Enter SID Blog