SID.ir New Version

Use Online Translation Powered By

Click Here STRS

STRS

Paper Information
Journal:   JOURNAL OF OCCUPATIONAL HYGIENE ENGINEERING   Summer 2018 , Volume 5 , Number 2 ; Page(s) 1 To 11.
 
Paper: 

Comparison Of Static Wave Ratio And Transfer Function Method In Determining The Sound Absorption Coefficient Of Materials
 
DOI: 

10.21859/johe.5.2.1

 
Author(s):  Golmohammadi Rostam, Oliaei Mohammad*, Aliabadi Mohsen, Shahidi Reza, Orvati Movafagh Mostafa
 
* Department of Occupational Hygiene, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran
 
Abstract: 
Background and Objective: Sound absorption coefficient determination is an important factor in selecting the proper materials to control indoor noise. Therefore, this study aimed to compare the results of sound absorption coefficient of different materials by standing wave ratio and transfer function method, as well as developing a regression model in adjusting the provided results. Materials and Methods: The current study was conducted on 46 acoustic materials. In order to measure the absorption coefficient of different materials, two instruments called the impedance tube (model 9410, AvaSina, Iran) and the impedance tube (model SW 260, BSWA, USA) in compliance with ISO 10534-2 in the frequency range of 125 to 2000 Hz were utilized. Results: The obtained results from the regression model revealed that frequency of 500 Hz has the highest correlation (r=0. 968, R2=0. 936), and the lowest correlation coefficient was found at 125 Hz (r=0. 368, R2=0. 136). In addition, the correlation coefficient of NRC was 0. 829. Conclusion: The results showed that the two methods were consistant at the frequencies of 250, 500, 1000 and 2000 Hz. It can be concluded that the standing wave ratio method is a reliable approach in determining sound absorption coefficient of acoustic materials.
 
Keyword(s): Acoustic Materials,Impedance Tube,Static Wave Ratio,Sound Absorption Coefficient,Transfer Function
 
 
International related papers: 
 
Most related Highly related Moderately related Least related
 
References: 
  • Not Registered.
  •  
  •  
 
Citations: 
 
+ Click to Cite.
APA: Copy

GOLMOHAMMADI, R., & OLIAEI, M., & ALIABADI, M., & SHAHIDI, R., & Orvati Movafagh, M. (2018). Comparison of Static Wave Ratio and transfer Function Method in Determining the Sound Absorption Coefficient of Materials. JOURNAL OF OCCUPATIONAL HYGIENE ENGINEERING, 5(2 ), 1-11. https://www.sid.ir/en/journal/ViewPaper.aspx?id=653388



Vancouver: Copy

GOLMOHAMMADI ROSTAM, OLIAEI MOHAMMAD, ALIABADI MOHSEN, SHAHIDI REZA, Orvati Movafagh Mostafa. Comparison of Static Wave Ratio and transfer Function Method in Determining the Sound Absorption Coefficient of Materials. JOURNAL OF OCCUPATIONAL HYGIENE ENGINEERING. 2018 [cited 2022May25];5(2 ):1-11. Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=653388



IEEE: Copy

GOLMOHAMMADI, R., OLIAEI, M., ALIABADI, M., SHAHIDI, R., Orvati Movafagh, M., 2018. Comparison of Static Wave Ratio and transfer Function Method in Determining the Sound Absorption Coefficient of Materials. JOURNAL OF OCCUPATIONAL HYGIENE ENGINEERING, [online] 5(2 ), pp.1-11. Available: https://www.sid.ir/en/journal/ViewPaper.aspx?id=653388.
 
 
Persian Abstract Yearly Visit 54
 
 
Latest on Blog
Enter SID Blog