List Of Volumes: 4 Volume(s) Year 2021 Year 2020 Year 2019 Volume 48, Number 4 (85) Volume 49, Number 3 (88) Volume 49, Number 2 (87) Volume 49, Number 1 (86) Year 2018
List Of Journal Paper(s): QUARTERLY JOURNAL OF MECHANICAL ENGINEERING:winter 2019, Volume 48, Number 4 (85) 40 Paper(s) 1 : Effects of Non-Gray Radiating Gases on Mixed Convection Heat Transfer in an Inclined Duct with Separation Author(s): ATASHAFROOZ M.*,Gandjalikhan Nassab S. A.R. Page(s): From 1 To 10 Keyword(s): Non-gray medium,FSK method,Combined heat transfer,Radiative heat transfer,Flow separation Reference(s): (0) Citation(s): (0) 2 : Sliding mode Control of an Autonomous Underwater vehicle with Parametric uncertainty and Sensors Noises Author(s): Hasanzadeh Ghasemi R.*,Hedayati Khodayari M. Page(s): From 107 To 116 Keyword(s): Sliding Mode Control,Autonomous Underwater Vehicle,Chattering,Kalman Filter Observer Reference(s): (0) Citation(s): (0) 3 : Block Diagram Simulation of a Large Horizontal Axis Wind Turbine Author(s): EBRAHIMI A.*,Azardar M. Page(s): From 11 To 18 Keyword(s): Horizontal axis wind turbine,Block diagram,Pitch control,AMESim Reference(s): (0) Citation(s): (0) 4 : The Mechanical Properties of Nanoclay/E-glass-Epoxy Multiscale Grid Composites under 3-point Bending Test Author(s): Khosravi h.,EslamiFarsani R.* Page(s): From 117 To 125 Keyword(s): Grid-Stiffened Composite Panels,Multiscale Composites,Nanoclay Particles,3-point Bending Test,Energy Absorption Reference(s): (0) Citation(s): (0) 5 : Viscoelastic Properties of Vascular grafts: a Comparison Between Small Saphenous Vein and Internal Thoracic Artery Author(s): Khosravi A.,Salami Bani m.*,Bahreinizad H. Page(s): From 127 To 131 Keyword(s): Small saphenous vein,Internal thoracic artery,Dynamic mechanical analysis,Viscoelasticity Reference(s): (0) Citation(s): (0) 6 : Closed-form Solution for Forced Convection of Power-law Fluid Flow through Isothermal Tubes Author(s): Daghighi S.Z.,Norouzi m.* Page(s): From 133 To 142 Keyword(s): Power-law fluid,Heat convection,Isothermal tube,Modal analysis,Power-law index Reference(s): (0) Citation(s): (0) 7 : Investigation and Optimization of Multi-walled Multi-cell Energy Absorbers considering Different Cross-sections Author(s): Dehghanian M.A.,ASGARI M.* Page(s): From 143 To 152 Keyword(s): Energy absorption,double layer tubes,conical and multicellular tubes Reference(s): (0) Citation(s): (0) 8 : Energetic and Exergitic analysis and Optimization of Organic Rankine cycle (ORC) for Waste heat recovery Author(s): deymi dashtebayaz m.*,Mohammadi S. Page(s): From 153 To 161 Keyword(s): Heat recovery,organic Rankine cycle,internal combustion engine,simulation of thermodynamic Reference(s): (0) Citation(s): (0) 9 : Evaluation of Aluminum Effect on the Microstructural changes, Mechanical properties and Fatigue life of Hadfield hypereutectoid Steel Author(s): Sabzi m.*,Balak Z. Page(s): From 163 To 170 Keyword(s): Hadfield steel,fatigue life,mechanical properties,microstructural changes,Al Reference(s): (0) Citation(s): (0) 10 : An Equilibrium Thermodynamics Investigation on Influence of Magnetic Field Work on Molar Fraction of Main Products of Methane– Air Reaction Author(s): Saeedi a.*,Khadem J.,Raznahan H. Page(s): From 171 To 178 Keyword(s): Uniform magnetic field,Combustion,Chemical species,Methane Reference(s): (0) Citation(s): (0) 11 : Static and Dynamic Properties of Concrete Contained Waste Ttire Rubber Author(s): SADRMOMTAZI A.*,Zarshin Zanoosh R.,Babaei H. Page(s): From 179 To 188 Keyword(s): Rubberized concrete,Impact loading,Dynamic modulus of elasticity,Mass-spring model,Ductile concrete Reference(s): (0) Citation(s): (0) 12 : The blank Investigation of Square parts in Deep drawing Author(s): Salavati H.*,Maftooni H. Page(s): From 189 To 193 Keyword(s): Deep drawing,Forming,Blank,Simulation Reference(s): (0) Citation(s): (0) 13 : Effects of Unbalance and Controller Gains on Nonlinear Dynamic of a Coaxial Rotor in Active Magnetic Bearings and Contact with Auxiliary Bearings Author(s): Ebrahimi r.,Ghayour M.*,Mohammad Khanlo H.,Tikani R. Page(s): From 19 To 28 Keyword(s): Coaxial rotor,Active magnetic bearing,Auxiliary bearing,Nonlinear dynamic,Bifurcation Reference(s): (0) Citation(s): (0) 14 : Uncertainty Analysis in Induction Heating by Magnetic Micro/nanoparticles during Hyperthermia Author(s): Talati f.*,Taheri A.A. Page(s): From 195 To 201 Keyword(s): Hyperthermia,Uncertainty,Electromagnetic field,Magnetic Micro/ Nanoparticles,FDM Reference(s): (0) Citation(s): (0) 15 : Investigation of Microstructure and Mechanical properties for Multi-layered Al/Cu/Mg Composite Produced by Cold Roll Bonding Author(s): Tayyebi m.*,Rahmatabadi D.,Rashidi R.,Hashemi R. Page(s): From 203 To 208 Keyword(s): Multi-layered Al/Cu/Mg composite,Cold Roll Bonding,mechanical properties,fracturgraphi and microstructure Reference(s): (0) Citation(s): (0) 16 : Study of the Effect of Engine Speed and the Operating life on Blowby in Fueled Motoring for XU7JP/L3 Engine Author(s): ABDI AGHDAM E.*,Zamzam A. Page(s): From 209 To 218 Keyword(s): Blowby,Motoring,XU7JP/L3,Engine life,Engine speed Reference(s): (0) Citation(s): (0) 17 : Multi-response Optimization of Dry EDM with Different Mediums Using the Taguchi Based Grey Relational Analysis Author(s): Fattahi s.,Baseri H.* Page(s): From 219 To 226 Keyword(s): Dry EDM,Taguchi method,Grey relational analysis,multi-objective optimization Reference(s): (0) Citation(s): (0) 18 : Analysis of Natural Gas Pipeline Network in Critical State: The Effect of Important Parameters in Critical State Author(s): Farzaneh Gord M.*,Rahbari H.R. Page(s): From 227 To 235 Keyword(s): Natural Gas,Pipeline Network,Critical State,Friction Factor,Natural Gas Composition Reference(s): (0) Citation(s): (0) 19 : Interlaminar Stresses Analysis for laminated composite beams on Elastic foundation with Horizontal and Vertical springs Author(s): Ghasemi A.R.*,Ghasemi m. Page(s): From 229 To 236 Keyword(s): In-plane stresses,Numerical method,Composite beam,Elastic foundation Reference(s): (0) Citation(s): (0) 20 : Numerical Analysis of Effect of STF with Frictional Hypothesis on Impact of Ballistic Projectile to Fabric Made of Kevlar 29 Fibers Author(s): QAHARI H.*,KORDANI N. Page(s): From 237 To 244 Keyword(s): Kevlar 29,Ballistic limit,Elasticity Module,Poisson Ratio Reference(s): (0) Citation(s): (0) 21 : Experimental Investigation of Thermal characterization of Impinging two Flame Jets with landfill Gas Author(s): Kaveh b.,Mallaei Barzi Y.*,Kiani M. Page(s): From 245 To 254 Keyword(s): landfill gas,interferometry,impinging flames,temperature field,Mach zehnder Reference(s): (0) Citation(s): (0) 22 : Steady and Unsteady Methods Simulation Using Computational Fluid Dynamics and Numerical Study of Geometrical changes in a stage axial flow Turbomachinery Author(s): KARAMI S.*,Rostami M. Page(s): From 255 To 264 Keyword(s): Computational Fluid Dynamics,Axial Flow Turbomachinery,Turbulence Model Transfer Shear stress,Shock Waves Reference(s): (0) Citation(s): (0) 23 : A Similarity Solution on Entropy Generation for a Porous Media with Variable Heat Flux Author(s): Lakzian e.*,Koochakinia S. Page(s): From 265 To 270 Keyword(s): Similarity solution,Heat Flux,The heat transfer,Porous plate,Entropy Analysis Reference(s): (0) Citation(s): (0) 24 : The Effect of Different Corrugated on the rate of Natural Convection Heat Transfer inside a Square Cavity Author(s): Mohebbi r.*,Masodnia M. Page(s): From 271 To 279 Keyword(s): Natural convection,Square cavity,Corrugated,Nusselt number Reference(s): (0) Citation(s): (0) 25 : Effects of Reduced Graphene Oxide Particles on the Creep Behavior of Adhesively Bonded Joints Author(s): Marami Gh.R.,Vakili Tahanmi F.,Saeimi Sadigh M.A.* Page(s): From 281 To 287 Keyword(s): Adhesive joints,Reduced Graphene Oxide,Creep Reference(s): (0) Citation(s): (0) 26 : Numerical Study of the Mixed Convection and the Entropy Generation in a Rhombic Enclosure Filled with the Cu-Water Nanofluid with the Heat Absorption/ Generation Author(s): Mehryan S.A.M.*,Saffarian M.R.,Namazian Z.,Moradi Kashkooli F. Page(s): From 289 To 298 Keyword(s): Mixed convection,Nanofluid,Entropy generation,Absorption/generation heat,Rhombic enclosure Reference(s): (0) Citation(s): (0) 27 : Exergetic and Thermodynamic Analysis of Several Combinations of Gas Turbine Cycles with Multiple Effect Evaporation Desalination Author(s): Abolhasan Alavi S.M.,Nouri Gooshki F.,Shakib S.E.*,Ghafooryan M.M. Page(s): From 29 To 37 Keyword(s): Energy and exergy analyses,Steam injection,Exergy destruction,Cogeneration,Multi-effect thermal vapor compression desalination Reference(s): (0) Citation(s): (0) 28 : Investigations of the Effects of Different types of Cooling conditions in Friction stir Process on the Mechanical properties of AAAluminum 7075 Author(s): Nourbakhsh s.h.*,Farhang Koupaei A.H.,Atrian A.,Botshekanan dehkordi M. Page(s): From 299 To 307 Keyword(s): Friction stir process,7075 aluminum alloy,Mechanical properties,Submerged,Cooling rate Reference(s): (0) Citation(s): (0) 29 : Numerical Comparison of Regenerative and Steam Injected Gas Turbine Cycles Author(s): Hashemi S.M.R.,Ghassabi Gh.*,Khaledi A.A. Page(s): From 309 To 318 Keyword(s): Thermal efficiency,Nox,Combustion chamber,Computational fluid dynamics Reference(s): (0) Citation(s): (0) 30 : Energy and Exergy Analysis of a Novel Biogas Steam Reforming System for Hydrogen Production using Solar Energy Author(s): Yari m.*,Ghaebi H.,Ghavami gargari S. Page(s): From 319 To 328 Keyword(s): Steam reforming,Biogas,Hydrogen production,Energy,Exergy Reference(s): (0) Citation(s): (0) 31 : Evaluation of Window overhang and External wall thermal Conductivity reduction Effect On office Cooling load in 3 Climates Hot and Humidity, Mild and Cold Author(s): Asghari M.,Poolaei Z.*,Yazdani H. Page(s): From 331 To 335 Keyword(s): Simulation,Energy,Building,Overhang Reference(s): (0) Citation(s): (0) 32 : Buckling analysis of Truncated conical Sandwich Shells with FGM Face sheets using Improved Higher-order Theory Author(s): Seidi j.* Page(s): From 337 To 340 Keyword(s): Truncated conical sandwich shell,buckling analysis,Nano-FGM Reference(s): (0) Citation(s): (0) 33 : Investigation on Aspect Ratio and Nanoparticles of Nano-fluid Flow in Rectangular Channels Author(s): Noorian Ardakani m.,OLOOMI S.A.A.*,Zare Mirok Abad M.H. Page(s): From 347 To 351 Keyword(s): Heat transfer,Pressure Drop,MWCNT,Constant Temperature,Rectangular Tube Reference(s): (0) Citation(s): (0) 34 : Study of the Effect of Blade Numbers on Centrifugal Pump Performance Author(s): Ehghaghi M.B.*,Kuzegar Ghiyasi K.,Vajdi M. Page(s): From 39 To 46 Keyword(s): Centrifugal pump,Numerical Simulation,impeller,head of pump Reference(s): (0) Citation(s): (0) 35 : Creation Effect of Composite Coating Containing Titanium Diboride through Flux Cored Arc Welding on the Wear and Hardening Behaviors of Low Carbon Steel Author(s): AMIRABADIZADEH S.R.*,Shokouhfar A.,Rahimi Balai E.,Sabet H.,Ebrahimnezhad Khaljiri H. Page(s): From 47 To 55 Keyword(s): Composite Layer,Low carbon Steel,Titanium Diboride,Hardness,Wear Resistance Reference(s): (0) Citation(s): (0) 36 : Optimum Design of a Single Circumferential Groove to Improve the Compressor Performance with CFD, Neural Networks and Multi-Objective Genetic Algorithm Author(s): Bazazzadeh m.,Agha Seyed Mirzabozorg M.,Hamzezade M.* Page(s): From 57 To 66 Keyword(s): Circumferential groove,Optimization,Multi-objective genetic algorithm,Neural networks,Stall margin,CFD Reference(s): (0) Citation(s): (0) 37 : Vibration Analysis of Magneto-electro-elastic Nanobeams on Elastic Foundation using Integrodifferential Equations model Author(s): Pilafkan R.*,Khajehzadeh S. Page(s): From 67 To 76 Keyword(s): Electromagnetic Nanobeam,Nonlocal Elasticity,Meshless Methods,Radial Point Interpolation Function,Timoshenko Theory Reference(s): (0) Citation(s): (0) 38 : Numerical Modeling of Turbulent Reacting flow in Porous Media Author(s): Torshizi M.,Khaleghi H.*,Mohammadzadeh K. Page(s): From 77 To 85 Keyword(s): Porous burner,Turbulence,Reaction flow,double decomposition,non-thermal equilibrium Reference(s): (0) Citation(s): (0) 39 : Design, Control and Experimental test of Pneumatic Leg Rehabilitation Device for Isokinetic Exercise Author(s): CHAVOSHIAN SEYED MAHDI,TAGHIZADEH M.*,Karouti A. Page(s): From 87 To 95 Keyword(s): Leg Rehabilitation Device,Isokinetic,Pneumatic,Control Reference(s): (0) Citation(s): (0) 40 : Modeling and Performance improvement of a Beta type Stirling engine for Cogeneration of Heat and Electricity Author(s): Chahartaghi m.*,Faghani GH.,Sheykhi M.,Taheri R. Page(s): From 97 To 106 Keyword(s): Stirling emgine,cogeneration,adiabatic,regenerator Reference(s): (0) Citation(s): (0)